KMT STELLRAM - каталог решений для высокопроизводительного фрезерования - 2014 год EN

                                                             для размещения заказа - kennametal@kennametal.su

5230 Chevron Long Edge Milling

The 5230VS Series: Cut Machining Time by up to 50% or More

Shell         •	 90 degree roughing
50mm – 100mm
              •	 High Metal Removal Rates

              •	 High Stability and Rigidity

              •	 Square inserts, 4 cutting edges

              •	 Three grades, four geometries

              •	 Shell and Cylindrical construction

              •	 Standard and long series available

              •	 Cutting diameters from 50mm to 100mm

              •	 Insert sizes 9,52mm and 12,70mm

              •	 Depth of cut from 51mm to 133mm

              5230 Case Histories

              Material: Titanium 555-3
              Cutter: 5230VS12 (63mm Cutter)
              Component: Landing Gear
              Industry: Aerospace
              Insert Grade: X500
              RPM: 150
              Cutting Speed Vc: 29,7 m/min
              Feed per Tooth fz: 0,1 mm/min
              Feed Rate: 60 mm/min
              Depth of Cut ap: 50mm

              Increased Metal Removal Rate by 300%!

              Material: Titanium 6-4
              Cutter: 5230VS12 (80mm Cutter)
              Component: Bulkhead
              Industry: Aerospace
              Insert Grade: X500
              RPM: 275
              Cutting Speed Vc: 69,0 m/min
              Feed per Tooth fz: 0,1 mm/min
              Feed Rate: 148 mm/min
              Depth of Cut ap: 60mm

              Incredible Metal Removal Rate of 43 in3 / min.

50 www.kennametal.su

                                                               для заказа - kennametal@kennametal.su