KMT STELLRAM - каталог решений для высокопроизводительного фрезерования

                                          для размещения заказа - kennametal@kennametal.su                                                  5230VS09
                                                                                                                                          Milling Inserts

SDHT09-422  SDHT09-423         SDMT09-41     SDMW09-TN                                                                                    dr
                                                                                                                                                  ls
Product                                      Application & Material             Dimensions (mm)

                                 Roughing    Semi-Finishing          Finishing

  EDP Item Description    Grade              Depth of Cut (mm)                  d (IC) l s r hm min

031261 SDHT09T308EN-422  X500    ap max* or     ap max. and     ap min. - max.
033075 SDHT09T308EN-422  SP6519   ae max.*   ae max. 15% D**
                                                                       -
                                                                       -        9,52 9,52 3,97 0,80       0,03
                                                                                9,52 9,52 3,97 0,80       0,03

031260 SDHT09T308EN-423  X500                           - - 9,52 9,52 3,97 0,80 0,04
033074 SDHT09T308EN-423  SP6519                                               - 9,52 9,52 3,97 0,80 0,04

014410 SDMT09T308EN-41   X500                                        - 9,52 9,52 3,97 0,80 0,04
031479 SDMT09T308EN-41   SP6519                                      - 9,52 9,52 3,97 0,80 0,04
017325 SDMT09T308EN-41   MP91M                                       - 9,52 9,52 3,97 0,80 0,04

015232 SDMW09T308TN      X500                                 - - 9,52 9,52 3,97 0,80                     0,15
                                                              - - 9,52 9,52 3,97 0,80                     0,15
031482 SDMW09T308TN      SP6519                               - - 9,52 9,52 3,97 0,80                     0,15
                                          3rd Choice | Material Guide Key descriptions found on page 63.
017327 SDMW09T308TN      MP91M

Machining Choice: 1st Choice 2nd Choice

* Note: Please do not surpass the recommended max. ap for slotting as shown on the steel body page 52.
* Note: ap max. for profiling is only possible when ae < 75% of the Diameter.
** Note: For semi finishing, axial engagement ap for slotting and radial engagement ae for profiling should be max. 15% of the Diameter.
SDHT09T308EN-423 to be used in unstable conditions.

Note: Feed recommendations can be found on page 54. Speed recommendations can be found on page 55.

www.kennametal.su                                                                                                                         53

                                             для заказа - kennametal@kennametal.su
KMT STELLRAM - каталог решений для высокопроизводительного фрезерования - 2014 год EN
