KMT STELLRAM - каталог решений для высокопроизводительного фрезерования - 2014 год EN
для размещения заказа - kennametal@kennametal.su 5230VS09
Recommended Speeds
Speed vc (m/min) Wear Resistance
5230VS Series -- +
Coolant Recommendation CVD Speed min. - max. CVD
X Grade Standard
Recommended Possible PVD MP91M
Standard 140 - 345
ISO Materials Rm and X500 SP6519
Hardness 120 - 305
Unalloyed 130 - 270 130 - 295 105 - 270
Steel <600 N/mm2 115 - 240 115 - 260
<180 HBN 100 - 210 100 - 230
P <950 N/mm2 75 - 160 75 - 175 80 - 205
<280 HBN 50 - 100 50 - 110
Alloyed 700-950 N/mm2 115 - 250 115 - 270 50 - 130
Steel 200-280 HBN 100 - 220 105 - 235
950-1200 N/mm2 50 - 110 50 - 120 145 - 365
Stainless 280-355 HBN 120 - 280 140 - 295 115 - 285
1200-1400 N/mm2 105 - 205 110 - 240
M Steel 355-415 HBN 95 - 170 100 - 220 105 - 260
PH Stainless Austenitic + Ferritic
300 series
K Cast Iron
Martensitic
N Aluminium 400 series
& Alloys
Refractory
P.H.
Grey
GG-Ft
Spheroidal-Ductile
GGG-FGS
Malleable
GTS - MN/MP
Aluminium & Alloys
< 16% Si 116 HBN
Aluminium + Silicon
> 16% Si 92 HBN
Iron Based 23 - 48 23 - 55
High Cobalt Based 21 - 44 22 - 48
Nickel Based 24 - 51 25 - 55
S Temperature
Alloys
Titanium Based 35 - 73 36 - 79
H Hard Hard Steel
Materials >1400 N/mm2
>415 HBN
Chilled Cast Iron
>1400 N/mm2
> 400 HBN
www.kennametal.su 55
для заказа - kennametal@kennametal.su