KMT STELLRAM - каталог решений для высокопроизводительного фрезерования - 2014 год EN

5505 Ball Nose Contour Mills  для размещения заказа - kennametal@kennametal.su

5505VX State of the Art Ball Nose Cutters

Weldon                                     •	 Reinforced design for heavy machining
20mm – 50mm                                •	 High volume of chip cutting
                                           •	 Excellent chip control and evacuation

Cylindrical                                5505VX Ball Nose Cutters are ideal for roughing and semi-finishing
16mm – 32mm                                of profiles and complex contours in Steel, Alloyed Steel, Stainless
Modular                                    Steel, High Temperature Alloys and Cast Iron.	
16mm – 32mm
                                           	 • One grade, one geometry does it all
                                           	 • Helical insert design and rigid fixation for increased
                                           		 speeds and feeds
                                           	 • Double edge insert is indexable for reduced inventory
                                           	 • Slotting to full radius

Case History                  Material: Stainless Steel 403
                              Cutter: 5505VX (25mm Cutter)
    66                        Component: Turbine Blade
                              Industry: Power Generation
                              Insert Grade: SP6519
                              RPM: 2293
                              Cutting Speed Vc: 183 m/min
                              Feed per Tooth fz: 0,28mm
                              Feed Rate: 1285 mm/min
                              Depth of cut ap: 3,18mm

                              40% Increase in Productivity

                                                                                www.kennametal.su

                              для заказа - kennametal@kennametal.su