KMT STELLRAM - каталог решений для высокопроизводительного фрезерования - 2014 год EN
5702VZD & 5720VZ для размещения заказа - kennametal@kennametal.su
Technical Information
Machinability by Materials (Aluminium)
Alloy Alloy CHEMICAL COMPOSITION LIMITS (WT%) Typical Rm Machinability Machinability Typical vc m/min fz mm/Z
Group Designation tremper (Mpa) Chip formation Applications min. - max. max.
Cu Si Fe Mn Mg Zn Cr Ti Pb Bi Al Others
Al 1050 0.05 0.25 0.4 0.5 0.05 0.05 - - - - 99.50min - H14 105 D A Chemical equipment
- - - - 99.00min - H14 90 D Sheet metal work 600 - 3000 0,2
1100 0.05~0.20 Si+Fe1.0max 0.05 - 0.1 - - 0.2 0.6 remaining - T3 310 A
A Coiled tube
2011 50.~60. 0.4 0.7 - - 0.3 A
2014 3.9~5.0 0.5~1.2 0.7 0.4~1.2 0.2~0.8 0.25 0.1 0.15 - - remaining - T6 430 B A Screw machine products.
B
2017 3.5~4.5 0.2~0.8 0.7 0.4~1.0 0.4~0.8 0.25 0.1 0.15 - - remaining - T4 390 B A Tuck frame.
Al-Cu B A
0.1 0.15 - - remaining - T4 465 Aircraft structure. 400 - 2500 0,25
2024 3.8~4.9 0.5 0.5 0.3~0.9 1.2~1.8 0.25 Jet engine impellers.
Aircraft engine
2218 3.5~4.5 0.9 1 0.2 1.2~1.8 0.25 0.1 - - - remaining Ni1.7~2.3 T72 331 B cylinder heads.
2224 3.8~4.4 0.12 0.15 0.30~0.9 1.2~1.8 0.25 0.1 0.15 - - remaining - AA
Al-Mn 3003 0.05~0.20 0.6 0.7 1.0~1.5 - 0.1 - - - - remaining - H14 140 D B Cooking utensils. 200 - 2500 0,2
Chemical equipment.
Al-Si 4032 0.5~1.3 11.0~13.5 1 - 0.8~1.3 0.25 0.1 - - - remaining Ni0.5~1.3 T6 379 B D Pistons. 200 - 1000 0,18
5052 0.1 0.25 0.4 0.1 2.2~2.8 0.1 0.15~0.35 - - - remaining - H14 260 C A
H34 Architectural.
5056 0.1 0.3 0.4 0.05~0.20 4.5~5.6 0.1 0.05~0.20 - - - remaining - H12 300 C A Cable Sheeting.
Al-Mg Welded pressure
H32 vessels. Hydraulic tubes. 400 - 3000 0,25
5083 0.1 0.4 0.4 0.4~1.0 4.0~4.9 0.25 0.05~0.25 0.15 - - remaining - H112 335 C A Transportation
5086 0.1 C A equipment.
0.4 0.5 0.20~0.7 3.5~4.5 0.25 0.05~0.25 0.15 - - remaining - H32 300
H116
6061 0.15~0.40 0.4~0.8 0.7 0.15 0.8~1.2 0.25 0.04~0.35 0.15 - - remaining - T6 300 C B
6063 0.1 0.2~0.6 0.35 0.1 0.45~0.9 0.1 0.1 0.1 - - remaining - T5 200 C B
- T6 379 C
6070 0.15~0.40 1.0~1.7 0.5 0.40~1.0 0.50~1.2 0.25 0.1 0.15 - - remaining - T6 C C Heavy duty structure.
- T9 400 B Furniture. Architectural.
Al-Mg-Si 6151 0.35 0.6~1.2 1 0.2 0.45~0.8 0.25 0.15~0.35 0.15 - - remaining - T6 310 D
C Heavy duty welded 400 - 2500 0,2
6262 0.15~0.40 0.4~0.8 0.7 0.15 0.8~1.2 0.25 0.04~0.14 0.15 0.4 0.7 remaining structure. Pipeline.
6351 0.1 0.7~1.3 0.5 0.4~0.8 0.40~0.8 0.2 - 0.2 - - remaining B Heat Sink.
C
6463 0.2 0.20~0.6 0.15 0.05 0.45~0.9 0.05 - - - - remaining - T6 241 C B
7001 1.6~2.6 0.35 0.4 0.2 2.6~3.4 6.8~8.0 0.18~0.35 0.2 - - remaining - O BA
7003 0.2 0.3 0.35 0.3 0.50~1.0 5.0~6.5 0.2 0.2 - - remaining Zr0.05~0.25 T5 400 B A
Al-Zn 7050 2.0~2.6 0.12 0.15 0.1 1.9~2.6 5.7~6.7 0.04 0.06 - - remaining Zr0.08~0.15 T73 530 B A High strength structure.
B 400 - 3000 0,25
7075 1.2~2.0 0.4 0.5 0.3 2.1~2.9 5.1~6.1 0.18~0.28 0.2 - - remaining - T6 570
A Aircraft structure. Bat.
7178 1.6~2.4 0.4 0.5 0.3 2.4~3.1 6.3~7.3 0.18~0.35 0.2 - - remaining - T6 600 B A
7475 1.2~1.9 0.1 0.12 0.06 1.9~2.6 5.2~6.2 0.18~0.25 0.06 - - remaining - T61 565 B A
Machinability Vc = x D x n / 1000 m/min = mm x RPM
A EXCELLENT
B GOOD-TO-EXCELLENT D: Tool diameter, N: RPM, Vc: Cutting speed, = 3.1416
C GOOD
D NOT GOOD Choose a cutting speed in the range of values, compatible with
the cutter max rotation capacity (engraved on the body)
and your spindle stability.
82 www.kennametal.su
для заказа - kennametal@kennametal.su
