KMT STELLRAM - каталог решений для высокопроизводительного фрезерования - 2014 год EN

5702VZD14                         для размещения заказа - kennametal@kennametal.su
Technical Information

Calculation of the average chip thickness in relation with the ae (Radial Engagement) if ae is less than 50% of Dia.

Formula: Programme Feed Rate (fz)         hm	 =	Average chip thickness  Formula: Average Chip Thickness (hm)
                                          ae	 =	Radial engagement
fz = hm x              d                  fz	 =	Feed per tooth                      hm = fz x  ae
                       ae                 d	 = 	Cutter diameter                                d

5702VZD14 Ramp Angle °                                                  Metal Removal

             Insert ZDCX1403...FR-701 (Radius mm)                               Calculated with 24000 RPM
                                                                                                  Z Qmax - cm3/min
Cutter dia.  Facet         2,0mm  2,50mm  3,00mm   4,00mm               Cutter                    2 720
  20mm        11.0           9.8     9.0     8.0      6.3                 20

*For Slotting applications with 5702VZD14 series the maximum ap         The chart above shows total metal removal capacity
is 6mm.                                                                 (based on 24,000 RPM) by cutter diameter and
                                                                        number of teeth (2).

                                                                        The maximum RPM is engraved on all cutter bodies.

These tools are designed, manufactured, tested and balanced in
accordance with EN ISO 15641:2001 for maximum stability in high
speed applications.

90 www.kennametal.su

                                                               для заказа - kennametal@kennametal.su