KMT STELLRAM - полный каталог инструмента - 2014 год EN
7745VSE09 для размещения заказа - kennametal@kennametal.su
Milling Inserts
End Mills & Face Mills SDET09 SDHT09-422 SDHT09-423 SDMT09-41 SDMW09 dr
ls
Product Application & Material Dimensions (mm)
Roughing Semi-Finishing Finishing
EDP Item Description Grade Depth of Cut (mm) d (IC) l s r hm min
ap max. ap min. - max. ap min. - max.
5,00
1,00 - 2,50 0,20 - 1,00
Insert selection with corner radius
017725 SDET09T308FN GH1 9,52 9,52 3,97 0,80 0,02
034520 SDET09T308EN SP6519 - - 9,52 9,52 3,97 0,80 0,03
031261 SDHT09T308EN-422 X500 9,52 9,52 3,97 0,80 0,05
033075 SDHT09T308EN-422 SP6519 - 9,52 9,52 3,97 0,80 0,05
031260 SDHT09T308EN-423 X500 - 9,52 9,52 3,97 0,80 0,05
033074 SDHT09T308EN-423 SP6519 - 9,52 9,52 3,97 0,80 0,05
014410 SDMT09T308EN-41 X500 - 9,52 9,52 3,97 0,80 0,04
031479 SDMT09T308EN-41 SP6519 - 9,52 9,52 3,97 0,80 0,04
017325 SDMT09T308EN-41 MP91M - 9,52 9,52 3,97 0,80 0,04
015232 SDMW09T308TN X500 - - 9,52 9,52 3,97 0,80 0,15
- - 9,52 9,52 3,97 0,80 0,15
031482 SDMW09T308TN SP6519 - 9,52 9,52 3,97 0,80 0,15
3rd Choice | Material Guide Key descriptions found on page A5.
017327 SDMW09T308TN MP91M
Machining Choice: 1st Choice 2nd Choice
SDHT09T308EN-423 should be used for unstable conditions.
SDMW09T308TN should be used in Stainless Steel and High Temperature Alloys with heavy scale and generally when the
conditions are unstable. Inserts with radius are only for semi roughing applications where a finished surface is not required.
Note: Feed recommendations can be found on page A99. Speed recommendations can be found on page A104.
A98 www.kennametal.su
для заказа - kennametal@kennametal.su