KMT STELLRAM - полный каталог инструмента - 2014 год EN

                   для размещения заказа - kennametal@kennametal.su                                     80.0VA90-_R-16 Series
                                                                                                   Cartridge Shoulder Milling Cutter

                                                                                                                   Facing              Shoulder /
                                                                                                                                       Profiling /
                                                                                                                                        Slotting

90° CARTRIDGE SHOULDER MILLING ASSEMBLIES                                                          80.0VA90-_R-16

Applications:                                                                                      8000VA90-_R-16:
80.0VA90 cutters series are assembled with cartridges for AP..16 milling inserts for face and      Maximum ap = 16mm
shoulder milling applications.                                                                     Effective Cutting Diameter
                                                                                                   Range = 106mm to 406mm
This cutter series is available in two different versions, both with medium pitch.
                                                                                                   * Denotes non stock items diameter
The cutters series 8000VA90 has an unequal medium pitch for reducing vibration and is              321mm - 406mm
suitable for roughing, semi-finishing and finishing of Steel, Steel Alloys, Stainless Steel, Cast
Iron and Aluminium Alloys.                                                                         8010VA90-_R-16:
                                                                                                   Maximum ap =16mm
The 8010VA90 series has an equal medium pitch and is especially recommended for                    Effective Cutting Diameter
roughing, semi-finishing and finishing of High Temperature Alloys such as Iron Based Alloys,       Range = 106*mm to 206*mm
Cobalt Based Alloys, Nickel Based Alloys and Titaniums.
                                                                                                   * Denotes non stock items.
Note: The 80.0VA90 series when mounted with cartridge 80VA90R-16 using
AP..1604.. A-Style inserts cannot utilise the wiper cartridge for finishing when a fine
finished surface is required.

Note: When using inserts with a radius larger than 2,00mm the cartridges need to be modified
for additional clearance by the end user.

www.kennametal.su                                                                                                                      A111

                   для заказа - kennametal@kennametal.su