KMT STELLRAM - полный каталог инструмента

                   для размещения заказа - kennametal@kennametal.su                                           80.0VX.92-_R-12 & -16 Series
                                                                                                               Cartridge High Feed Milling Cutter

                   Facing  Ramping                                                                 Pocketing  Helical  Helical             Slotting /  Spiral / Circular
                                                                                                              Interpolation Interpolation  Shoulder
                                                                                                                       with Bore Hole

CARTRIDGE HIGH FEED MILLING ASSEMBLIES                                                             80_0VX_92-_R-12 & -16
80.0VX.92 high feed milling cutters are capable of high metal removal in facing applications.
The patented insert design offers better performance than round insert cutters.                    8000VXD92-_R-12:
                                                                                                   Maximum ap = 2,50mm
The 80.0VX.92 high feed cutters are the best solution when specifically focusing on reducing       Diameter Range =
cycle time or removing a maximum volume of material in the shortest time.                          106mm to 256mm

Our high feed cutter has the capacity to achieve 5 times higher feed rate than other existing      8010VXD92-_R-12:
cutters in the market. This is due to its unique design and insert positioning. 80.0VX.92 cutters  Maximum ap = 2,50mm
also have a tremendous advantage, when used in a long (extended) toolholder.                       **Diameter Range =
                                                                                                   106mm to 206mm
These cutters absorb vibration and generally reduces the instability and deflection of the tool.
                                                                                                   8000VXE92-_R-16:
Applications:                                                                                      Maximum ap = 3,50mm
The 80.0VX.92 cutters are assembled with cartridges for XD...or XE... high feed milling inserts    Diameter Range =
and are ideal for a wide range of applications. Facing, slotting pocketing, ramping and helical    106mm to 256mm
interpolation. Available with medium pitch.
                                                                                                   8010VXE92-_R-16:
The cutter series 8000VX.92 has an unequal medium pitch for reducing vibration and is              Maximum ap = 3,50mm
suitable for roughing and semi-finishing of Steel, Steel Alloys, Stainless Steel, Cast Iron and    **Diameter Range =
Aluminium Alloys.                                                                                  106mm to 206mm

The cutters series 8010VX.92 has an equal medium pitch and is especially recommended for           **Denotes non stock
roughing and semi-finishing of High Temperature Alloys, such as Iron Based alloys, Cobalt
Based Alloys, Nickel Based Alloys and Titanium.

NOTE: The 80.0VX.92 series when mounted with high feed cartridges 80VX.92R-12 or
80VX.92R-16 using XD... or XE... inserts cannot utilise the wiper cartridge for finishing when a
fine finished surface is required.

www.kennametal.su                                                                                                                                      A117

                   для заказа - kennametal@kennametal.su
KMT STELLRAM - полный каталог инструмента - 2014 год EN
