KMT STELLRAM - полный каталог инструмента - 2014 год EN
80.0VXE92-_R-16 для размещения заказа - kennametal@kennametal.su
Face Milling Cutter Assemblies
Cartridge Face Mills d1 Product Dimensions (mm) Spares
H
D Screw
D Effective ap No. of Tightening
Da EDP Item Description Cutting Da* H d1 max Teeth EDP EDP
Nm
Cutter Body & Cartridges Diameter 6,10
6,10
8000VXE92-_ R-16 Bodies with Unequal Medium Pitch & Cartridges
033207 8000VXE92-100R-16 82,15 106 68 32 3,5 6
033208 8000VXE92-125R-16 107,15 131
033209 8000VXE92-160R-16 142,15 166 63 40 3,5 8
033210 8000VXE92-200R-16 182,15 206
033211 8000VXE92-250R-16 232,15 256 63 40 3,5 10 031225 DP5013T 030819 TP20
TP20
63 60 3,5 12
63 60 3,5 16
8010VXE92-_ R-16 Bodies with Equal Medium Pitch & Cartridges
033212 8010VXE92-100R-16** 82,15 106 68 32 3,5 6
033213 8010VXE92-125R-16** 107,15 131
033214 8010VXE92-160R-16** 142,15 166 63 40 3,5 8 031225 DP5013T 030819
033215 8010VXE92-200R-16** 182,15 206 63 40 3,5 10
63 60 3,5 12
** Denotes non stock items.
Da* = Outside Diameter
Product Spares
EDP Item Description EDP Screw Cartridge Adjustment
EDP Tightening Screw Screw
Nm EDP EDP
Cartridge & Spares
031308 80VX92R-16 031225 DP5013T 030819 TP20 6,10 022646 7065 - -
80VX92R-16 Note: Mounting instructions refer to pages A161 - A164.
Note: XE..1605.., X-Style cutter assemblies cannot utilise the finishing wiper cartridges.
80.0VXE92-_R-16 Technical Information (mm)
Product Dimensions
Facing Ramping ap max Max Ramping Helical
Pitch Helical / RPM Interpolation
EDP Item Description Angle Helical Hole Linear
82,15 A° B° min. - max. 10800
107,15 2,50 9200
033207 8000VXE92-100R-16 142,15 0.39 0.47 186 210 2,50 7800 Flat
033208 8000VXE92-125R-16 182,15 0.29 0.36 236 260 2,50 6800
033209 8000VXE92-160R-16 232,15 0.22 0.27 306 330 2,50 5900 Facing Pitch
033210 8000VXE92-200R-16 0.17 0.20 386 410 2,50
033211 8000VXE92-250R-16 82,15 0.13 0.16 486 510 10800 Ramp angle A uses one
107,15 2,50 9200 outside cutting edge only.
033212 8010VXE92-100R-16** 142,15 0.39 0.47 186 210 2,50 7800
033213 8010VXE92-125R-16** 182,15 0.29 0.36 236 260 2,50 6800 Ramp angle B uses
033214 8010VXE92-160R-16** 0.22 0.27 306 330 2,50 two cutting edges
033215 8010VXE92-200R-16** 0.17 0.20 386 410 (one outside and
one inside edge).
** Denotes non stock items.
AB
ap A = max ramp angle utilizing full
face contact
D
Da* B = max ramp angle utilizing full
contact + internal corner radius
Depth of Cut (ap)
A120 www.kennametal.su
для заказа - kennametal@kennametal.su