KMT STELLRAM - полный каталог инструмента - 2014 год EN

                   для размещения заказа - kennametal@kennametal.su                                         80.0VOD45-_R-04 & -06 Series
                                                                                                                    Cartridge Face Milling Cutter

                   Facing  Ramping  Pocketing                                                      Helical  Helical Spiral / Circular  Chamfering  Shoulder /
                                                                                                   Interpolation Interpolation                     Profiling /
                                                                                                            with Bore Hole                          Slotting

42° CARTRIDGE FACE MILLING ASSEMBLIES                                                                       80_0VOD45-_R-04 & -06
The 80.0VOD45 cutters are designed to machine all materials. Octagonal inserts offer up to
eight economical cutting edges.                                                                             80.0VOD45-_R-04:
                                                                                                            Maximum ap = 3,50mm
80.0VOD45 cutters are assembled with cartridges for OD..0404.. or OD..0605.. milling inserts                (ap1 max = 8mm)
for face milling applications.                                                                              Effective Cutting Diameter
                                                                                                            Range = 100mm to 400mm
The cutters series 8000VOD45 has an unequal medium pitch for reducing vibration and is
for roughing, semi-finishing and finishing of Steel, Steel Alloys, Stainless Steel, Cast Iron and           ** Denotes non stock items 8000VOD45
Aluminium Alloys.                                                                                           diameter 315 - 400mm

The 8010VOD45 series has an equal medium pitch and is especially recommended for                            ** Denotes non stock items 8010VOD45
roughing, semi-finishing and finishing of High Temperature Alloys such as Iron Based Alloys,                diameter 100 - 200mm
Cobalt Based Alloys, Nickel Based Alloys and Titanium.
                                                                                                            80.0VOD45-_R-06:
The 8000VOD45 series can be assembled with a particular wiper cartridge for finishing when                  Maximum ap = 4,50mm
a fine finished surface is required. The corresponding pocket on the body for the finishing                 (ap1 = 10mm)
cartridge is marked with a “F”.                                                                             Effective Cutting Diameter
                                                                                                            Range = 100mm to 400mm
Note: The 8010 series are not possible to assemble with a wiper cartridge.
                                                                                                            ** Denotes non stock items 8000VOD45
                                                                                                            diameter 315 - 400mm

                                                                                                            ** Denotes non stock items 8010VOD45
                                                                                                            diameter 100 - 200mm

www.kennametal.su                                                                                                                                  A125

                   для заказа - kennametal@kennametal.su