KMT STELLRAM - полный каталог инструмента - 2014 год EN
для размещения заказа - kennametal@kennametal.su 80.0VOD45-_R-04
Milling Inserts
d 135°
ODET04-441 ODET04-44 ODMT04-41 ODMT04-412 ODEW04-RA ODMW04-SN SPHX12-EN (wiper)
Product Application & Material Dimensions (mm) r Cartridge Face Mills
l
Roughing Semi-Finishing Finishing s
EDP Item Description Grade Depth of Cut (mm) d (IC) l s r hm min
12,70 4,00 4,76 Facet 0,02
ap max. ap min. - max. ap min. - max.
3,50 1,00 - 2,00 0,20 - 1,00
024911 ODET0404APFN-441 GH1
022198 ODET0404APEN-44 X500 - - 12,70 4,00 4,76 Facet 0,04
031470 ODET0404APEN-44 SP6519 - - 12,70 4,00 4,76 Facet 0,04
022199 ODET0404APEN-44 MP91M - - 12,70 4,00 4,76 Facet 0,04
022061 ODMT0404APEN-41 X500 - - 12,70 4,00 4,76 Facet 0,06
031472 ODMT0404APEN-41 SP6519 - - 12,70 4,00 4,76 Facet 0,06
017775 ODMT0404APEN-41 MP91M - - 12,70 4,00 4,76 Facet 0,06
030768 ODMT040408EN-412 X500 - - 12,70 4,00 4,76 0,80 0,06
030769 ODMT040408EN-412 X700 - - 12,70 4,00 4,76 0,80 0,06
031540 ODMT040408EN-412 SP6519 - - 12,70 4,00 4,76 0,80 0,06
015143 ODMT040408EN-41 X500 - - 12,70 4,00 4,76 0,80 0,06
030330 ODMT040408EN-41 X700
031471 ODMT040408EN-41 SP6519 - 12,70 4,00 4,76 0,80 0,06
017303 ODMT040408EN-41 MP91M
- - 12,70 4,00 4,76 0,80 0,06
- - 12,70 4,00 4,76 0,80 0,06
027884 ODEW0404APTR-RA SC3025 - 12,70 4,00 4,76 Wiper 0,19
Facet
017672 ODMW040408SN X500 - - 12,70 4,00 4,76 0,80 0,27
031462 ODMW040408SN SP6519 - - 12,70 4,00 4,76 0,80 0,27
017304 ODMW040408SN MP91M - - 12,70 4,00 4,76 0,80 0,27
029096 ODMW040408SN SC3025 - - 12,70 4,00 4,76 0,80 0,27 INSERT APPLICATION NOTES:
3rd Choice | Material Guide Key descriptions found on page A5. ODMW040408SN X500 should be
Machining Choice: 1st Choice 2nd Choice used on Stainless Steel and High
Temperature Alloys with heavy
Note: Feed recommendations can be found on page A127. Speed recommendations can be found on page A128. scale.
Product Application & Material Dimensions (mm) ODMW040408SN inserts should
generally be used for heavy duty
Roughing Semi-Finishing Finishing applications only.
EDP Item Description Grade Depth of Cut (mm) d (IC) l s r hm min ODMT040408EN-41 and
ODMT040408EN-412 in Grade
ap max. ap min. - max. ap min. - max. X700 is recommended for medium
- - 0,20 - 1,00 roughing of Stainless Steel and
High Temperature Alloys when a
stronger cutting edge is required.
Wiper Inserts
017237 SPHX12M512EN GH1 - - 12,70 12,70 5,00 1,20 0,02
031455 SPHX12M512N SA9608 - - 12,70 12,70 5,00 1,20 0,02
Machining Choice: 1st Choice 2nd Choice 3rd Choice | Material Guide Key descriptions found on page A5.
Note: Mounting instruction for wiper inserts refer to pages A161 - A164.
www.kennametal.su A127
для заказа - kennametal@kennametal.su