KMT STELLRAM - полный каталог инструмента - 2014 год EN
для размещения заказа - kennametal@kennametal.su 80.0VOD45-_R-06
Milling Inserts
d 135°
ODET06-441 ODET06-44 ODMT06-41 ODEW06-RA ODMW06-TN ODMW06-SN SPHX12-EN (wiper)
Product Application & Material Dimensions (mm) r Cartridge Face Mills
l
Roughing Semi-Finishing Finishing s
EDP Item Description Grade Depth of Cut (mm) d (IC) l s r hm min
16,00 6,00 5,55 Facet 0,02
ap max. ap min. - max. ap min. - max.
4,50 1,00 - 2,00 0,20 - 1,00
026588 ODET0605APFN-441 GH1
026592 ODET0605APEN-44 X500 - - 16,00 6,00 5,55 Facet 0,04
031501 ODET0605APEN-44 SP6519 - - 16,00 6,00 5,55 Facet 0,04
034513 ODET0605APEN-44 SP4019 - - 16,00 6,00 5,55 Facet 0,04
026591 ODET0605APEN-44 MP91M - - 16,00 6,00 5,55 Facet 0,04
026590 ODMT0605APEN-41 X500 - - 16,00 6,00 5,55 Facet 0,06
031502 ODMT0605APEN-41 SP6519 - 16,00 6,00 5,55 Facet 0,06
034514 ODMT0605APEN-41 SP4019 - 16,00 6,00 5,55 Facet 0,06
026589 ODMT0605APEN-41 MP91M - 16,00 6,00 5,55 Facet 0,06
027885 ODEW0605APTR-RA SC3025 - 16,00 6,00 5,55 Facet 0,19
026596 ODMW060512TN X500 - - 16,00 6,00 5,55 1,20 0,17
031503 ODMW060512TN SP6519 - - 16,00 6,00 5,55 1,20 0,17
034515 ODMW060512TN SP4019 - 16,00 6,00 5,55 1,20 0,17
026595 ODMW060512TN MP91M - - 16,00 6,00 5,55 1,20 0,17
025838 ODMW060512SN X500 - - 16,00 6,00 5,55 1,20 0,27
031483 ODMW060512SN SP6519 - - 16,00 6,00 5,55 1,20 0,27 INSERT APPLICATION NOTES:
ODMW060512TN X500 or SP4019
025836 ODMW060512SN MP91M - - 16,00 6,00 5,55 1,20 0,27 should be used in Stainless Steel
and High Temperature Alloys with
029097 ODMW060512SN SC3025 - - 16,00 6,00 5,55 1,20 0,27 heavy scale.
Machining Choice: 1st Choice 2nd Choice 3rd Choice | Material Guide Key descriptions found on page A5. ODMW060512TN should be used
when the machine tool has low
Note: Feed recommendations can be found on page A132. Speed recommendations can be found on page A133. power available.
Product Application & Material Dimensions (mm) ODMW060512SN Geometry
should be used for heavy duty
Roughing Semi-Finishing Finishing applications.
EDP Item Description Grade Depth of Cut (mm) d (IC) l s r hm min
ap max. ap min. - max. ap min. - max.
- - 0,20 - 1,00
Wiper Inserts
017237 SPHX12M512EN GH1 - - 12,70 12,70 5,00 1,20 0,02
031455 SPHX12M512EN SA9608 - - 12,70 12,70 5,00 1,20 0,02
Machining Choice: 1st Choice 2nd Choice 3rd Choice | Material Guide Key descriptions found on page a5.
Note: Mounting instruction for wiper inserts refer to page A161.
www.kennametal.su A131
для заказа - kennametal@kennametal.su