для размещения заказа - kennametal@kennametal.su 5315VA12
Milling Inserts
ADGT12-721 ADET12-48 ADHT12-46 ADKT12-45 d 85°
r s
Product Application & Material Dimensions (mm)
Roughing Semi-Finishing Finishing l
EDP Item Description Grade Depth of Cut (mm) d (IC) l s r hm min Shoulder Mills
7,87 12,70 3,97 Facet 0,04
ap max* or ap max. and ap min. - max.
ae max.* ae max. 15% D** -
029098 ADGT12T3PDFR-721 GH1
030856 ADET12T308ER-48 X500 - 7,87 12,70 3,97 0,80 0,04
030857 ADET12T308ER-48 SP6519 - 7,87 12,70 3,97 0,80 0,04
030807 ADET12T3PDER-48 X500 - 7,87 12,70 3,97 Facet 0,04
030770 ADET12T3PDER-48 SP6519 - 7,87 12,70 3,97 Facet 0,04
029329 ADHT12T308ER-46 X500 - - 7,87 12,70 3,97 0,80 0,05
030406 ADHT12T308ER-46 X700 - - 7,87 12,70 3,97 0,80 0,05
031526 ADHT12T308ER-46 SP6519 - 7,87 12,70 3,97 0,80 0,05
029327 ADHT12T3PDER-46 X500 - - 7,87 12,70 3,97 Facet 0,05
031525 ADHT12T3PDER-46 SP6519 - 7,87 12,70 3,97 Facet 0,05
027913 ADKT12T3PDER-45 X500 - 7,87 12,70 3,97 Facet 0,08
031514 ADKT12T3PDER-45 SP6519 - 7,87 12,70 3,97 Facet 0,08
027915 ADKT12T3PDER-45 MP91M - 7,87 12,70 3,97 Facet 0,08
027916 ADKT12T3PDER-45 SC3025 - 7,87 12,70 3,97 Facet 0,08
3rd Choice | Material Guide Key descriptions found on page A5.
Machining Choice: 1st Choice 2nd Choice
* Note: Please do not surpass the recommended max. ap for slotting as shown on the steel body page A184.
* Note: Please respect the following rule for profiling with ap max:
for Weldon shank cutter Diameter 25mm ae < 25% D
for Weldon shank cutter Diameter 32mm ae < 35% D
for Weldon shank cutter Diameter 40mm ae < 40% D
for Shell mill cutter Diameter 40mm ae < 75% D
** Note: For semi finishing, axial engagement ap for slotting and radial engagement ae for profiling should be max. 15% of the Diameter.
Note: Feed recommendations can be found on page A186. Speed recommendations can be found on page A187.
www.kennametal.su A185
для заказа - kennametal@kennametal.su