5505VX для размещения заказа - kennametal@kennametal.su
Technical Information
5505VX Technical Information
Working Diameter:
Contour Mills De = 2 x r2 - (r -ap)2
where: De = Working Diameter
r ap r = Cutter radius
ap = Axial Depth of Cut
De
5505VX Technical Information
Average chip thickness: hm
where: hm = fz x ( )r2 - r - ae 2 ( )r2 - r - ap 2
x
r r
fz = Feed per tooth ae = Radial Depth of Cut
ap = Axial Depth of Cut
hm = Average chip thickness
r = Insert radius To find programmed feedrate: fz
hm
fz =
( )r2 - r - ae 2 ( )r2 - r - ap 2
x
r r
Please do not try to remove
this screw. This screw is
glued into the body to keep
the inserts in the correct
position.
A200 www.kennametal.su
для заказа - kennametal@kennametal.su