для размещения заказа - kennametal@kennametal.su 7702VRD07
Milling Inserts & Recommended Feeds
RDET07-701 RDHW07
Product Application & Material Dimensions (mm) d s
Roughing Semi-Finishing Finishing
EDP Item Description Grade Depth of Cut (mm) d (IC) l s r hm min
ap max ap min - max ap min - max Contour Mills
- 0,30 - 1,30 0,10 - 0,50
-
034556 RDET0702M0E-701 SP4019 - 7,00 - 2,38 3,50 0,03
034557 RDHW0702M0T SP4019 - 7,00 - 2,38 3,50 0,07
3rd Choice | Material Guide Key descriptions found on page A5.
Machining Choice: 1st Choice 2nd Choice
7702VRD07 Feeds fz (mm/tooth)
Geometry
Grade
Operation
Unalloyed
Steel
Alloyed
Steel
Stainless
Steel
Stainless Steel
Refractory PH
Gray
Iron
Spheroidal-
Ductile Iron
Malleable
Iron
Aluminium &
Alloys
<16% Si 116 HBN
Aluminium &
Silicon
>16% Si 92 HBN
HTA Iron
Based Alloys
HTA Cobalt
Based Alloys
HTA Nickel
Based Alloys
HTA Titanium
Based Alloys
Hard Steel
>1400 N/mm2
>415 HBN
Chilled Cast Iron
>1400 N/mm2
>400 HBN
Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max.
E-701 SP4019 Contouring 0,05 - 0,12 0,05 - 0,10 - - 0,05 - 0,12 0,05 - 0,12 0,05 - 0,10 0,03 - 0,10 0,03 - 0,08 - - - - 0,03 - 0,05 0,03 - 0,05
T SP4019 Contouring 0,12 - 0,20 0,12 - 0,18 - - 0,12 - 0,20 0,12 - 0,20 0,12 - 0,18 - - - - - - 0,04 - 0,08 0,04 - 0,08
Note: HTA = High Temperature Alloys
Speed recommendations can be found on page A226.
www.kennametal.su A219
для заказа - kennametal@kennametal.su