KMT STELLRAM - полный каталог инструмента

                   для размещения заказа - kennametal@kennametal.su                                                                    7690VA Series
                                                                                                                                 Shoulder Milling Cutter

                                                   Facing  Shoulder /                        Ramping      Helical     Pocketing     Helical     Spiral /  Trochoidal
                                                           Profiling /                                 Interpolation             Interpolation  Circular
                                                            Slotting                                  with Bore Hole

90 DEGREE CUTTERS                                                                                     7690VA
Kennametal offers a number of 90 degree cutters for shoulder milling, face milling and slotting.

7690VA cutters are available in a wide range of depth-of-cut variations. Inserts are available        7690VA09:
in 9mm, 12mm and 16mm sizes. An extensive range of geometries and grades are available                Maximum ap = 8,00mm
for all applications.                                                                                 Diameter Range = 10mm to 63mm

Applications:                                                                                         7690VA12:
                                                                                                      Maximum ap = 11,00mm
The 7690VA series are ideal for roughing, semi-finishing and finishing of Steel, Alloyed Steel,       Diameter Range = 20mm to 80mm
Stainless Steel, Cast Iron, High Temperature Alloys and Aluminium Alloys.

The 7690VAP series are ideal for roughing, semi-finishing and finishing of Stainless Steel,           7690VA16:
High Temperature Alloys plus Low Carbon Steels. This cutter is designed to utilise one                Maximum ap = 16,00mm
geometry of insert only - APET1604...ER-48                                                            Diameter Range = 25mm to 125mm

Note: When an approx. 90° shoulder is required then the following geometries need to                  Note: Larger diameter Shell Mill Fixation
be used.                                                                                              cutters with interchangeable cartridges are
                                                                                                      available. Please see page A112
7690VA09: Geometry -42
7690VA12: Geometry -46                                                                                7690VAP16:
7690VA16: Geometry -42, -46                                                                           Maximum ap = 15,80mm
and the flat insert APFW...                                                                           Diameter Range = 40mm to 100mm
7690VAP16: Geometry -48

See the 90° deviations charts on pages A59 - A62.

www.kennametal.su                                                                                                                                         A45

                                                   для заказа - kennametal@kennametal.su
KMT STELLRAM - полный каталог инструмента - 2014 год EN
