KMT STELLRAM - полный каталог инструмента - 2014 год EN
7690VAP16 для размещения заказа - kennametal@kennametal.su
Shoulder Milling Cutter
End Mills & Face Mills d1 Product Dimensions (mm) Spares
H EDP Item Description D L/H l1 d1 ap No. of EDP EDP Screw
max Teeth Tightening
D -
Shell Mill Fixation - Nm
-
7690VAP16 Shell Mill Fixation -
-
034573 7690VAP16-A040Z05R 40 40 16 15,8 5 015262 D4010T 015240 T15 3,10
034574 7690VAP16-A050Z06R 50 40 3,10
034575 7690VAP16-A063Z07R 63 40 22 15,8 6 015262 D4010T 015240 T15 3,10
034576 7690VAP16-A080Z08R 80 50 3,10
034584 7690VAP16-A100Z10R 100 55 22 15,8 7 015262 D4010T 015240 T15 3,10
27 15,8 8 015262 D4010T 015240 T15
32 15,8 10 015262 D4010T 015240 T15
Note: To use radius larger than 2,00mm the cutter body needs to be modified for additional clearance by the end user.
The 7690VAP series are ideal for roughing, semi-finishing and finishing of Stainless Steel, High Temperature Alloys plus
Low Carbon Steels. This cutter is designed to utilise one geometry of insert only - APET1604...ER-48
7690VAP16 Technical Information (mm)
Product Dimensions
EDP Item Description Facing Ramping Helical Hole ap max Max
Pitch Angle ° min. - max. Helical / RPM
034573 7690VAP16-A040Z05R Linear Flat
034574 7690VAP16-A050Z06R 40 - -- 27000 Facing Pitch
034575 7690VAP16-A063Z07R 50 - -- - 23500
ap 034576 7690VAP16-A080Z08R 63 - -- - 20500
Depth of Cut (ap) 034584 7690VAP16-A100Z10R 80 - -- - 18000
100 - -- - 15500
-
Note: If using a insert with radius, then the facing pitch for all 7690VA series cutters is
equal to the cutting diameter (D) minus 2 x chosen radius.
A56 www.kennametal.su
для заказа - kennametal@kennametal.su