KMT STELLRAM - полный каталог инструмента - 2014 год EN
7792VX для размещения заказа - kennametal@kennametal.su
Recommended Speeds
End Mills & Face Mills Speed vc (m/min) Wear Resistance
7792VX Series -- +
Speed min. - max. CVD
Standard
Coolant Recommendation PVD CVD PVD Uncoated CVD SC3025
X Grade X Grade Standard Micrograin Standard
Recommended Possible 150 - 395
120 - 335
ISO Materials Rm and X400 X500 SP6519 GH2 SC6525
Hardness 140 - 370 105 - 275
Unalloyed 120 - 260 100 - 210 130 - 295
Steel <600 N/mm2 105 - 230 75 - 160 115 - 260
<180 HBN 95 - 200 50 - 100 100 - 230 120 - 325
P <950 N/mm2 70 - 150 115 - 250 75 - 175 105 - 290
<280 HBN 45 - 95 100 - 220 50 - 110
Alloyed 700-950 N/mm2 50 - 110 115 - 270
Steel 200-280 HBN 105 - 235 80 - 210
950-1200 N/mm2 50 - 120
Stainless 280-355 HBN 140 - 295 50 - 140
1200-1400 N/mm2 110 - 240
M Steel 355-415 HBN 100 - 220 145 - 390
115 - 305
PH Stainless Austenitic + Ferritic
300 series 400 - 2745
K Cast Iron 295 - 2135
Martensitic
400 series
Refractory
P.H.
Grey
GG-Ft
Spheroidal-Ductile
GGG-FGS
Malleable
GTS - MN/MP
Aluminium & Alloys 305 - 2130
N Aluminium < 16% Si 116 HBN
& Alloys Aluminium + Silicon 245 - 1760
> 16% Si 92 HBN
Iron Based 23 - 48 23 - 55
High Cobalt Based 21 - 44 22 - 48
Nickel Based
S Temperature
Alloys
24 - 51 25 - 55
Titanium Based 35 - 73 36 - 79
H Hard Hard Steel 45 - 95
Materials >1400 N/mm2
>415 HBN 35 - 80
Chilled Cast Iron
>1400 N/mm2
> 400 HBN
A72 www.kennametal.su
для заказа - kennametal@kennametal.su