KMT STELLRAM - полный каталог инструмента

                   для размещения заказа - kennametal@kennametal.su                                                    7745VS Series
                                                                                                    Face Milling and Chamfering Cutter

                                                                                                    Facing  Chamfering

45° LEAD ANGLE – FACE MILLS                                                                         7745VS
7745VS cutters are designed for machining Tool Steel and Cast Iron. They feature exceptionally
thick square inserts and are ideal for tough cutting conditions. The upper edge of the insert does  7745VS09:
not rest against a pocket allowing for recessing operations.                                        Maximum ap = 5mm
                                                                                                    Diameter Range = 16mm to 25mm
Ideal for roughing, semi-finishing and finishing. These cutters are a very good choice for
machining surfaces with heavy scale and are also ideal for machining surfaces with                  7745VS12:
irregular stock.                                                                                    Maximum ap = 7mm
                                                                                                    Diameter Range = 40mm to 125mm
This family is available in two different insert sizes: SC..09 and SC..12                           Note: Larger diameter Shell Mill Fixation
                                                                                                    cutters with interchangeable cartridges are
7745 cutters using 12mm inserts with 5mm thickness are able to cover irregular surfaces up          available. Please see page A136.
to 7mm ap. With its 0° axial and a radial negative rake angle this cutter has an excellent chip
evacuation particularly when using the full depth of cut capacity.

The smaller cutter series with 9mm inserts are ideal for facing small areas and chamfering any
style component.

www.kennametal.su                                                                                           A87

                   для заказа - kennametal@kennametal.su
KMT STELLRAM - полный каталог инструмента - 2014 год EN
