KMT STELLRAM - каталог решений для высокопроизводительного фрезерования - 2014 год EN

                          для размещения заказа - kennametal@kennametal.su  77 Family Case Histories

77 Family Case Histories

                          7710 Case History

                          Material: 600 Series High Temperature Alloy
                          Cutter: 7710VRD20 (100mm Cutter)
                          Component: Heat Exchanger Pump Housing
                          Industry: Power Generation - Nuclear
                          Insert Grade: X500
                          RPM: 105
                          Cutting Speed Vc: 33,5 m/min
                          Feed per Tooth fz: 0,323mm
                          Feed Rate: 203 mm/min
                          Depth of Cut ap: 6,35mm	

                          60% Reduction in Cycle Time

                           •	 150% Productivity Increase
                           •	 60% Reduction in Tooling Costs
                           •	 Zero Failures
                           •	 Zero Defects
                           •	 Finishing Operation Eliminated

                          7713 Case History

                          Material: Stainless Steel 300 Series
                          Cutter: 7713VR12 (63mm Cutter)
                          Component: Turbine Blade
                          Industry: Power Generation
                          Insert Grade: SP6519
                          RPM: 909
                          Cutting Speed Vc: 180 m/min
                          Feed per Tooth fz: 0,3mm
                          Feed Rate: 1,636 m/min
                          Depth of Cut ap: 2,2mm

                          80% Increase in Tool Life!

www.kennametal.su                                                           35

                          для заказа - kennametal@kennametal.su