KMT STELLRAM - каталог решений для высокопроизводительного фрезерования - 2014 год EN
5720VZ16 для размещения заказа - kennametal@kennametal.su
Milling Inserts, Recommended Feeds & Speeds
ZDET16-721 Application & Material Dimensions (mm) l s
dr
Product
Roughing Semi-Finishing Finishing
EDP Item Description Grade Depth of Cut (mm) d (IC) l s r hm min
ap max. ap min. - max. ap min. - max.
16* 1,00 - 5,00 0,20 - 1,00
030927 ZDET16M5PDFR-721 GH1 11,30 22,92 5,00 Facet 0,02
031384 ZDET16M504FR-721 GH1 11,30 22,92 5,00 0,40 0,02
030928 ZDET16M508FR-721 GH1 11,30 22,92 5,00 0,80 0,02
031385 ZDET16M512FR-721 GH1 11,30 22,92 5,00 1,20 0,02
030929 ZDET16M516FR-721 GH1 11,30 22,92 5,00 1,60 0,02
030930 ZDET16M520FR-721 GH1 11,30 22,92 5,00 2,00 0,02
030931 ZDET16M525FR-721 GH1 11,30 22,92 5,00 2,50 0,02
030932 ZDET16M530FR-721 GH1 11,30 22,92 5,00 3,00 0,02
030933 ZDET16M532FR-721 GH1 11,30 22,92 5,00 3,20 0,02
030934 ZDET16M540FR-721 GH1 11,30 22,92 5,00 4,00 0,02
030935 ZDET16M550FR-721 GH1 11,30 22,92 5,00 5,00 0,02
030936 ZDET16M560FR-721 GH1 11,30 22,92 5,00 6,00 0,02
Machining Choice: 1st Choice 2nd Choice 3rd Choice | Material Guide Key descriptions found on page 84.
* Max. possible ap of 16mm and ae the full diameter (depending on the application).
* For Slotting applications with 5720VZ16 series please see recommendations for maximum ap on page 81 .
5720VZ Feeds fz (mm/tooth) Speed vc (m/min)
Size 5720VZ Series K10-K20/C3 - C2 ISO / ANSI
Geometry
Speed min. - max.
Grade
Operation Uncoated Micrograin
Aluminium &
GH1
Alloys
<16% Si 116 HBN 400 - 3050
Aluminium &
Silicon 295 - 2440
>16% Si 92 HBN
14mm FR-721 GH1 Profile/ Pocketing Min. - Max. Min. - Max. Coolant Recommendation
0,02 - 0,25 0,02 - 0,20
Recommended Possible
ISO Materials Rm and
Hardness
Aluminium & Alloys
N Aluminium < 16% Si 116 HBN
& Alloys Aluminium + Silicon
> 16% Si 92 HBN
80 www.kennametal.su
для заказа - kennametal@kennametal.su