KMT STELLRAM - каталог решений для высокопроизводительного фрезерования - 2014 год EN

                                                      для размещения заказа - kennametal@kennametal.su

Metalcutting Safety

IMPORTANT SAFETY INSTRUCTIONS
Read before using the tools in this catalog!
Projectile and Fragmentation Hazards:
Modern metalcutting operations involve high spindle and cutter speeds and high temperatures and cutting forces. Hot metal chips may fly off the
workpiece during metalcutting. Although cutting tools are designed and manufactured to withstand high cutting forces and temperatures, they can
sometimes fragment, particularly if they are subjected to over-stress, severe impact, or other abuse.
To avoid injury:

    • Always wear appropriate personal protective equipment, including safety goggles, when operating metalcutting machines or working nearby.
    • Always make sure all machine guards are in place.
Breathing and Skin Contact Hazards:
Grinding carbide or other advanced cutting tool materials produces dust or mist containing metallic particles. Breathing this dust
or mist — especially over an extended period — can cause temporary or permanent lung disease or make existing medical conditions worse.
Contact with this dust or mist can irritate eyes, skin, and mucous membranes and may make existing skin conditions worse.
To avoid injury:
    • Always wear breathing protection and safety goggles when grinding.
    • Provide ventilation control and collect and properly dispose of dust, mist, or sludge from grinding.
    • Avoid skin contact with dust or mist.
For more information, read the applicable Material Safety Data Sheet provided by Kennametal and consult General Industry Safety and Health
Regulations, Part 1910, Title 29 of the Code of Federal Regulations.
These safety instructions are general guidelines. Many variables affect machining operations. It is impossible to cover every specific situation. The
technical information included in this catalog and recommendations on machining practices may not apply to your particular operation. For more
information, consult Kennametal’s Metalcutting Safety booklet, available free from Kennametal at 724.539.5747 or fax 724.539.5439. For specific
product safety and environmental questions, contact our Corporate Environmental Health and Safety Office at 724.539.5066 or fax 724.539.5372.

      Kennametal, the stylized K, Stellram and X Grades are trademarks of Kennametal, Inc. and are used
      as such herein. The absence of a product, service name, or logo from this list does not constitute a
      waiver of Kennametal’s trademark or other intellectual property rights concerning that name or logo.
      ©Copyright 2014 by Kennametal Inc., Latrobe, PA 15650. All rights reserved.

93 www.kennametal.su

                                                               для заказа - kennametal@kennametal.su