KMT STELLRAM - полный каталог инструмента - 2014 год EN

                        7745VSE12                                     для размещения заказа - kennametal@kennametal.su
                        Milling Inserts

End Mills & Face Mills  SDHT12-422       SDHT12-423        SDHT12-41       SDMW12                                                                       dr
                                                                                                                                                                ls
                              Product                                      Application & Material               Dimensions (mm)

                                                                 Roughing  Semi-Finishing          Finishing

                        EDP   Item Description       Grade                 Depth of Cut (mm)                    d (IC) l s r hm min

                                                                 ap max.   ap min. - max.     ap min. - max.
                                                                   7,00
                                                                           1,00 - 3,00             0,20 - 1,00

                             Insert selection with corner radius

                        030717 SDHT120412EN-422 X500                                               - 12,70 12,70 4,76 1,20 0,05
                                                                                                   - 12,70 12,70 4,76 1,20 0,05
                        030728 SDHT120412EN-422 SP6519

                        031218 SDHT120412EN-423      X500                                          - 12,70 12,70 4,76 1,20 0,06
                        031321 SDHT120412EN-423      SP6519                                        - 12,70 12,70 4,76 1,20 0,06

                        014411 SDMT120412EN-41       X500                                          - 12,70 12,70 4,76 1,20 0,05
                        031480 SDMT120412EN-41       SP6519                                        - 12,70 12,70 4,76 1,20 0,05
                        017326 SDMT120412EN-41       MP91M                                         - 12,70 12,70 4,76 1,20 0,05

                        015233 SDMW120412TN          X500                                  - - 12,70 12,70 4,76 1,20                  0,15
                                                                                           - - 12,70 12,70 4,76 1,20                  0,15
                        034518 SDMW120412TN          SP6519           3rd Choice | Material Guide Key descriptions found on page A5.

                        Machining Choice: 1st Choice 2nd Choice

                        SDHT120412EN-423 should be used for unstable conditions.
                        SDMW120412TN X500 should be used in Stainless Steel and High Temperature Alloys with heavy scale and generally when the
                        conditions are unstable. Inserts with radius are only for semi roughing applications where a finished surface is not required.
                        Note: Feed recommendations can be found on page A103. Speed recommendations can be found on page A104.

                        A102                                                                                                                            www.kennametal.su

                                                                           для заказа - kennametal@kennametal.su