KMT STELLRAM - полный каталог инструмента

                                              для размещения заказа - kennametal@kennametal.su                                7745VSE12
                                                                                                                             Milling Inserts

SDEX12-701    SDCT12           SDHT12-421         SDKT12-45     SDHT12-42              SDCW12  SDHW12                        dr               End Mills & Face Mills
                                                                                                                                     ls
     Product                                      Application & Material                       Dimensions (mm)

                                  Roughing        Semi-Finishing          Finishing

EDP  Item Description    Grade                    Depth of Cut (mm)                    d (IC) l s r hm min

                                         ap max.  ap min. - max.     ap min. - max.
                                           7,00
                                                  1,00 - 3,00             0,20 - 1,00

     Insert selection with facet

034522 SDEX1204AEFN-701 SP4019             -                 - 12,70 12,70 4,76 Facet 0,02
                                                                                                12,70 12,70 4,76 Facet 0,02
015149 SDEX1204AEFN-701 GH1

017243 SDCT1204AEFN      GH1                                                           12,70 12,70 4,76 Facet 0,02

015187 SDHT1204AEEN-421  X500              -                 -                         12,70 12,70 4,76 Facet 0,04
031477 SDHT1204AEEN-421  SP6519            -                 -                         12,70 12,70 4,76 Facet 0,04
017321 SDHT1204AEEN-421  MP91M             -                 -                         12,70 12,70 4,76 Facet 0,04

029457 SDKT1204AEEN-45   X500              -                               - 12,70 12,70 4,76 Facet 0,05
031532 SDKT1204AEEN-45   SP6519            -                               - 12,70 12,70 4,76 Facet 0,05
029456 SDKT1204AEEN-45   MP91M             -                               - 12,70 12,70 4,76 Facet 0,05

017729 SDHT1204AETN-42   X500                                              - 12,70 12,70 4,76 Facet 0,15
031478 SDHT1204AETN-42   SP6519                                            - 12,70 12,70 4,76 Facet 0,15
017322 SDHT1204AETN-42   MP91M
                                                                                       12,70 12,70 4,76 Facet 0,15

034517 SDCW1204AETN      X400              -                 -                         12,70 12,70 4,76 Facet 0,15
034516 SDCW1204AETN      SP4019                              -                         12,70 12,70 4,76 Facet 0,10
031404 SDCW1204AETN      SA9808                              -                         12,70 12,70 4,76 Facet 0,17

017730 SDHW1204AETN      X500                                     - - 12,70 12,70 4,76 Facet 0,15
                                                                  - - 12,70 12,70 4,76 Facet 0,15
017324 SDHW1204AETN      MP91M                3rd Choice | Material Guide Key descriptions found on page A5.

Machining Choice: 1st Choice 2nd Choice

SDHW1204AETN X500 should be used in Stainless Steel and High Temperature Alloys with heavy scale and generally
when the conditions are unstable.	 		
Note: Feed recommendations can be found on page A103. Speed recommendations can be found on page A104.

www.kennametal.su                                                                                                            A101

                                                  для заказа - kennametal@kennametal.su
KMT STELLRAM - полный каталог инструмента - 2014 год EN
