KMT STELLRAM - полный каталог инструмента - 2014 год EN
для размещения заказа - kennametal@kennametal.su 8000VS45-_R-12
Recommended Speeds
Speed vc (m/min) Cartridge Face Mills
8000VS45-_R-12 Wear Resistance
Series
-- +
Coolant Recommendation PVD CVD PVD Speed min. - max. CVD Uncoated Uncoated
X Grade X Grade Standard Standard Micrograin Cermet
Recommended Possible PVD
Standard
ISO Materials Rm and X400 X500 SP6519 SP4019 MP91M GH1* SA9608
Hardness 120 - 260
Unalloyed 105 - 230 115 - 250 130 - 295 120 - 280 140 - 345 230 - 345 265 - 380
Steel <600 N/mm2 95 - 200 100 - 220 115 - 260 110 - 250
<180 HBN 70 - 150 50 - 110 100 - 230 50 - 130
P <950 N/mm2 45 - 95 120 - 280 75 - 175 145 - 330 120 - 305 215 - 305 235 - 335
<280 HBN 105 - 205 50 - 110 115 - 255
Alloyed 700-950 N/mm2 95 - 170 115 - 270 105 - 235 105 - 270 190 - 270 205 - 295
Steel 200-280 HBN 105 - 235
950-1200 N/mm2 50 - 120
Stainless 280-355 HBN 140 - 295 80 - 205 140 - 205 155 - 225
1200-1400 N/mm2 110 - 240
M Steel 355-415 HBN 100 - 220 50 - 130 90 - 130 100 - 145
PH Stainless Austenitic + Ferritic 215 - 305 235 -335
300 series
K Cast Iron 195 - 275 215 - 305
Martensitic
N Aluminium 400 series 90 - 180 100 - 200
& Alloys
Refractory 145 - 365 135 - 290 280 -400
P.H.
115 - 285 120 - 245 220 -315
Grey
GG-Ft 105 - 260 115 - 200 200 -285
Spheroidal-Ductile
GGG-FGS
Malleable
GTS - MN/MP
Aluminium & Alloys
< 16% Si 116 HBN
Aluminium + Silicon
> 16% Si 92 HBN
Iron Based
High Cobalt Based
Nickel Based
S Temperature
Alloys
Titanium Based
H Hard Hard Steel 45 - 95 50 - 100 50 - 105
Materials >1400 N/mm2
>415 HBN 35 - 80 40 - 90 40 - 95
Chilled Cast Iron
>1400 N/mm2
> 400 HBN
Note: SCCT12M5ACTR in grade GH1 should only be used for machining Cast Iron.
Note: Wiper Insert SPHX12M512EN GH1 can be used for Steel, Steel Alloys, Stainless Steel and Cast Iron.
www.kennametal.su A139
для заказа - kennametal@kennametal.su