KMT STELLRAM - полный каталог инструмента - 2014 год EN

                      8000VS45-_R-12                 для размещения заказа - kennametal@kennametal.su
                      Technical Information

Cartridge Face Mills  8000VS45_R-12 Technical Information

                      Feed rate compensation: For 45° cutting, divide the hm value by the
                      sine of the approach angle (the sine of 45° = 0,707)

                      i.e.: hm               or      0,08
                                0,707                0,707	 = 0,113mm programmed feed rate

                      Calculation of the average chip thickness in relation with the ae (Radial Engagement) if ae is less than 50% of Dia.

                      Formula: Programme Feed Rate (fz)  hm	 =	Average chip thickness       Formula: Average Chip Thickness (hm)
                                                         ae	 =	Radial engagement
                            fz = hm x            d       fz	 =	Feed per tooth                          hm = fz x  ae
                                                 ae      d	 = 	Cutter diameter                                    d

                      A140                                                                                        www.kennametal.su

                                                         для заказа - kennametal@kennametal.su