80.0VSE45-_R-12 для размещения заказа - kennametal@kennametal.su
Milling Inserts
SDEX12-701 SDCT12-FN SDHT12-421 SDKT12-45 SDHT12-42 SDCW12-TN SDHW12-TN dr
ls
Product Application & Material Dimensions (mm)
Roughing Semi-Finishing Finishing
EDP Item Description Grade Depth of Cut (mm) d (IC) l s r hm min
ap max. ap min. - max. ap min. - max.
7,00
1,00 - 3,00 0,20 -1,00
-
Insert selection with facet - 12,70 12,70 4,76 Facet 0,02
12,70 12,70 4,76 Facet 0,02
034522 SDEX1204AEFN-701 SP4019
015149 SDEX1204AEFN-701 GH1
017243 SDCT1204AEFN GH1 12,70 12,70 4,76 Facet 0,02
015187 SDHT1204AEEN-421 X500 - - 12,70 12,70 4,76 Facet 0,04
031477 SDHT1204AEEN-421 SP6519 - - 12,70 12,70 4,76 Facet 0,04
017321 SDHT1204AEEN-421 MP91M - - 12,70 12,70 4,76 Facet 0,04
029457 SDKT1204AEEN-45 X500 - - 12,70 12,70 4,76 Facet 0,05
031532 SDKT1204AEEN-45 SP6519 - - 12,70 12,70 4,76 Facet 0,05
029456 SDKT1204AEEN-45 MP91M - - 12,70 12,70 4,76 Facet 0,05
017729 SDHT1204AETN-42 X500 - 12,70 12,70 4,76 Facet 0,15
031478 SDHT1204AETN-42 SP6519 - 12,70 12,70 4,76 Facet 0,15
017322 SDHT1204AETN-42 MP91M
12,70 12,70 4,76 Facet 0,15
034517 SDCW1204AETN X400 - - 12,70 12,70 4,76 Facet 0,15
034516 SDCW1204AETN SP4019 - 12,70 12,70 4,76 Facet 0,10
031404 SDCW1204AETN SA9808 - 12,70 12,70 4,76 Facet 0,17
017730 SDHW1204AETN X500 - - 12,70 12,70 4,76 Facet 0,15
- - 12,70 12,70 4,76 Facet 0,15
017324 SDHW1204AETN MP91M 3rd Choice | Material Guide Key descriptions found on page 9.
Machining Choice: 1st Choice 2nd Choice
INSERT APPLICATION NOTES:
SDHW1204AETN X500 should be used for machining Stainless Steel and High Temperature Alloys with heavy scale
and generally when the conditions are unstable.
Note: Feed recommendations can be found on page A146. Speed recommendations can be found on page A147.
A144 www.kennametal.su
для заказа - kennametal@kennametal.su
