KMT STELLRAM - полный каталог инструмента - 2014 год EN
для размещения заказа - kennametal@kennametal.su 80.0VSE45-_R-12
Milling Inserts
SDHT12-422 SDHT12-423 SDMT12-41 SDMW12 SPHX12-EN (wiper) dr
ls
Product Application & Material Dimensions (mm)
Roughing Semi-Finishing Finishing
EDP Item Description Grade Depth of Cut (mm) d (IC) l s r hm min
ap max. ap min. - max. ap min. - max.
7,00
1,00 - 3,00 0,20 -1,00
Insert selection with corner radius
030717 SDHT120412EN-422 X500 - 12,70 12,70 4,76 1,20 0,05
- 12,70 12,70 4,76 1,20 0,05
030728 SDHT120412EN-422 SP6519
031218 SDHT120412EN-423 X500 - 12,70 12,70 4,76 1,20 0,06
031321 SDHT120412EN-423 SP6519 - 12,70 12,70 4,76 1,20 0,06
014411 SDMT120412EN-41 X500 - 12,70 12,70 4,76 1,20 0,05
031480 SDMT120412EN-41 SP6519 - 12,70 12,70 4,76 1,20 0,05
017326 SDMT120412EN-41 MP91M - 12,70 12,70 4,76 1,20 0,05
015233 SDMW120412TN X500 - - 12,70 12,70 4,76 1,20 0,15
- - 12,70 12,70 4,76 1,20 0,15
034518 SDMW120412TN SP6519 3rd Choice | Material Guide Key descriptions found on page A5.
Machining Choice: 1st Choice 2nd Choice
Product Application & Material Dimensions (mm)
Roughing Semi-Finishing Finishing
EDP Item Description Grade Depth of Cut (mm) d (IC) l s r hm min
ap max. ap min. - max. ap min. - max.
- - 0,20 -1,00
Wiper Inserts GH1 - - 12,55 12,55 5,00 Wiper 0,02
SA9608 - - Facet 0,02
017237 SPHX12M512EN
031455 SPHX12M512N 12,55 12,55 5,00 Wiper
Facett
Machining Choice: 1st Choice 2nd Choice 3rd Choice | Material Guide Key descriptions found on page A5.
Note: Mounting instruction for wiper inserts refer to page A161.
INSERT APPLICATION NOTES:
SDMW120412TN X500 should be used for machining Stainless Steel and High Temperature Alloys with heavy scale and
generally when the conditions are unstable.
SDHT120412EN-423 X500 and SP6519 are recommended for Stainless Steel and High Temperature Alloys when
machining conditions are unstable.
Radius inserts are only for semi-roughing applications where a finished surface is not required.
Note: Feed recommendations can be found on page A146. Speed recommendations can be found on page A147.
www.kennametal.su A145
для заказа - kennametal@kennametal.su