KMT STELLRAM - полный каталог инструмента - 2014 год EN

80.0VSE45-_R-12            для размещения заказа - kennametal@kennametal.su
Technical Information

80.0VSE45 Technical Information

Feed rate compensation: For 45° cutting, divide the hm value by the
sine of the approach angle (the sine of 45° = 0,707)

i.e.: hm 	 or 	            0,08
          0,707 		         0,707	 = 0,113mm programmed feed rate

Calculation of the average chip thickness in relation with the ae (Radial Engagement) if ae is less than 50% of Dia.

Formula: Programme Feed Rate (fz)  hm	 =	Average chip thickness      Formula: Average Chip Thickness (hm)
                                   ae	 =	Radial engagement
      fz = hm x        d           fz	 =	Feed per tooth                      hm = fz x  ae
                       ae          d	 = 	Cutter diameter                                d

A148                                                                                    www.kennametal.su

                                   для заказа - kennametal@kennametal.su