KMT STELLRAM - полный каталог инструмента

                   для размещения заказа - kennametal@kennametal.su                                     80.0VR00-_R-16 Series
                                                                                                       Cartridge Face Milling Cutter

                                                                                               Facing  Ramping  Pocketing         Helical  Helical
                                                                                                                                  Interpolation Interpolation
                                                                                                                                           with Bore Hole

CARTRIDGE ROUND INSERT MILLING ASSEMBLIES                                                              80.0VR00-_R-16
The 80.0VR00-_R-16 cutter series with 6,35mm thick round button inserts is suitable to
machine very efficiently irregular surfaces and rough scale. This cutter can also be used for          8000VR00-_R-16:
heavy duty applications up to 8mm depth of cut.                                                        Maximum ap = 8,00mm
                                                                                                       Diameter Range Da* =
Applications:                                                                                          116mm to 416mm
80.0VR00-_R-16 cutters are assembled with cartridges for RP..1606.. milling inserts for face
milling applications. Available with medium pitch.                                                     **Denotes non stock items
                                                                                                       Diameter 331mm - 416mm
The cutter series 8000VR00-_R-16 has an unequal medium pitch for reducing vibration and
is for roughing of Steel, Steel Alloys, Stainless Steel and Cast Iron.                                 8010VR00-_R-16:
                                                                                                       Maximum ap = 8,00mm
The cutter series 8010VR00 has an equal medium pitch and is especially recommended for                 Diameter Range Da* =
roughing of High Temperature Alloys such as, Iron Based Alloys, Cobalt Based Alloys, Nickel            116mm to 216mm
Based Alloys and Titanium.
                                                                                                       **Denotes non stock items
Also, the 8000VR00-_R-16 series can be mounted with a particular wiper cartridge for                   Diameter 116mm - 216mm
finishing, when a fine finished surface is required. The corresponding pocket at the body
for the finishing cartridge is marked with an “F”.

Note: The 8010 series are not possible to assemble with wiper cartridge.

www.kennametal.su                                                                                                                          A149

                   для заказа - kennametal@kennametal.su
KMT STELLRAM - полный каталог инструмента - 2014 год EN
