KMT STELLRAM - полный каталог инструмента - 2014 год EN
для размещения заказа - kennametal@kennametal.su 80.0VR00-_R-16
Milling Inserts & Recommended Feeds
RPMT16-41 RPHT16-S RPHT16-T SPHX12-EN
Product Application & Material Dimensions (mm) d s Cartridge Face Mills
Roughing Semi-Finishing Finishing
EDP Item Description Grade Depth of Cut (mm) d (IC) l s r hm min
ap max. ap min. - max. ap min. - max. 16,00 -
8,00 1,00 - 3,00 0,20 -1,00 16,00 -
015223 RPMT1606M0E-41 X500 - 6,35 8,00 0,05
017311 RPMT1606M0E-41 MP91M 6,35 8,00 0,05
-
030390 RPHT1606M0S X400 - 16,00 - 6,35 8,00 0,15
017692 RPHT1606M0T X500 - 16,00 - 6,35 8,00 0,10
0,10
034566 RPHT1606M0T SP6519 - 16,00 - 6,35 8,00
Machining Choice: 1st Choice 2nd Choice 3rd Choice | Material Guide Key descriptions found on page A5.
RPHT1606MOS and RPHT1606MOT should be used for heavy duty applications.
Product Application & Material Dimensions (mm)
Roughing Semi-Finishing Finishing
EDP Item Description Grade Depth of Cut (mm) d (IC) l s r hm min
ap max. ap min. - max. ap min. - max.
- - 0,20 - 1,00
Wiper Inserts
017237 SPHX12M512EN GH1 - - 12,55 12,55 5,00 Wiper 0,02
031455 SPHX12M512EN SA9608 - - 12,55 12,55 5,00 Wiper 0,02
Machining Choice: 1st Choice 2nd Choice 3rd Choice | Material Guide Key descriptions found on page A5.
Note: Mounting instruction for wiper inserts refer to page A164.
80.0VR00-_R-16 Feeds fz (mm/tooth)
Geometry
Grade
Operation
Unalloyed
Steel
Alloyed
Steel
Stainless
Steel
Stainless Steel
Refractory PH
Gray
Iron
Spheroidal-
Ductile Iron
Malleable
Iron
Aluminium &
Alloys
<16% Si 116 HBN
Aluminium &
Silicon
>16% Si 92 HBN
HTA Iron
Based Alloys
HTA Cobalt
Based Alloys
HTA Nickel
Based Alloys
HTA Titanium
Based Alloys
Hard Steel
>1400 N/mm2
>415 HBN
Chilled Cast Iron
>1400 N/mm2
>400 HBN
E-41 X500 Facing Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max.
E-41 MP91M Facing
- - 0,04 - 0,27 0,04 - 0,16 - - - - - 0,04 - 0,13 0,04 - 0,13 0,04 - 0,13 0,04 - 0,16 - -
- - - - 0,10 - 0,35 0,10 - 0,35 0,10 - 0,30 - - - - - - - -
S X400 Facing 0,15 - 0,50 0,15 - 0,45 - - - - - - - - - - - 0,10 - 0,15 0,10 - 0,15
-
T X500 Facing 0,15 - 0,45 0,10 - 0,40 0,10 - 0,40 0,10 - 0,35 0,10 - 0,40 0,10 - 0,40 0,10 - 0,35 - - 0,10 - 0,28 0,10 - 0,28 0,10 - 0,28 0,10 - 0,30 - -
T SP6519 Facing 0,15 - 0,45 0,10 - 0,40 0,10 - 0,40 0,10 - 0,35 0,10 - 0,40 0,10 - 0,40 0,10 - 0,35 - 0,10 - 0,28 0,10 - 0,28 0,10 - 0,28 0,10 - 0,30 - -
Wiper Inserts Feed /revolution fn (mm / rev.)
SPHX GH1 Facing 1,00 - 4,00 1,00 - 3,00 0,80 - 2,50 0,80 - 2,00 1,00 - 2,50 0,80 - 2,20 0,80 - 2,00 - ------ -
SPHX SA9608 Facing 1,00 - 4,00 1,00 - 3,00 0,80 - 2,50 0,80 - 2,00 1,00 - 2,50 0,80 - 2,20 0,80 - 2,00 - - 0,50 - 1,50 0,50 - 1,50 0,50 - 1,50 0,50 - 1,80 - -
Note: HTA = High Temperature Alloys
Speed recommendations can be found on page A152.
www.kennametal.su A151
для заказа - kennametal@kennametal.su