KMT STELLRAM - полный каталог инструмента - 2014 год EN
80.0VR00-_R-16 для размещения заказа - kennametal@kennametal.su
Recommended Speeds
Cartridge Face Mills Speed vc (m/min)
80.0VR00-_R-16 Wear Resistance
Series
-- +
Speed min. - max. Uncoated
Cermet
Coolant Recommendation PVD CVD PVD CVD Uncoated
X Grade X Grade Standard Standard Micrograin
Recommended Possible
ISO Materials Rm and X400 X500 SP6519 MP91M GH1* SA9608
Hardness 120 - 260
Unalloyed 105 - 230 130 - 270 130 - 295 240 - 345 265 - 380
Steel <600 N/mm2 95 - 200 115 - 240 115 - 260
<180 HBN 70 - 150 100 - 210 100 - 230
P <950 N/mm2 45 - 95 75 - 160 75 - 175 215 - 305 235 - 335
<280 HBN 50 - 100 50 - 110
Alloyed 700-950 N/mm2 115 - 250 115 - 270 190 - 270 205 - 295
Steel 200-280 HBN 100 - 220 105 - 235
950-1200 N/mm2 50 - 110 50 - 120
Stainless 280-355 HBN 140 - 205 155 - 225
1200-1400 N/mm2
M Steel 355-415 HBN 90 - 130 100 - 145
PH Stainless Austenitic + Ferritic 215 -305 235 -335
300 series
195 - 275 215 - 305
Martensitic
400 series 90 - 180 100 - 200
Refractory
P.H.
Grey 120 - 280 140 - 295 145 - 365 135 - 290 280 -400
GG-Ft
K Cast Iron 105 - 205 110 - 240 115 - 285 120 - 245 220 -315
Spheroidal-Ductile
GGG-FGS 95 - 170 100 - 220 105 - 260 115 - 200 200 -285
Malleable
GTS - MN/MP
Aluminium & Alloys
N Aluminium < 16% Si 116 HBN
& Alloys Aluminium + Silicon
> 16% Si 92 HBN
Iron Based 23 - 48 23 - 55 50 - 75
High Cobalt Based 21 - 44 22 - 48 48 - 70
Nickel Based
S Temperature
Alloys 52 - 75
24 - 51 25 - 55
Titanium Based 35 - 73 36 - 79 60 - 95
H Hard Hard Steel 45 - 95
Materials >1400 N/mm2
>415 HBN 35 - 80
Chilled Cast Iron
>1400 N/mm2
> 400 HBN
* Note: Wiper Insert SPHX12M512EN GH1 can be used for Steel, Steel Alloys, Stainless Steel and Cast Iron.
A152 www.kennametal.su
для заказа - kennametal@kennametal.su