Ниже представлена эта же страница в формате, позволяющем производить копирование текста.

KMT STELLRAM - полный каталог инструмента - 2014 год EN

                   для размещения заказа - kennametal@kennametal.su                                     80.0VR00-_R-20 Series
                                                                                                       Cartridge Face Milling Cutter

                                                                                               Facing  Ramping  Pocketing  Helical         Helical
                                                                                                                           Interpolation Interpolation
                                                                                                                                           with Bore Hole

CARTRIDGE ROUND INSERT MILLING ASSEMBLIES                                                              80.0VR00-_R-20
The 80.0VR00-_R-20 cutter series with 6,35mm thick round button inserts is one of our
strongest cutters.                                                                                     8000VR00-_R-20:
                                                                                                       Maximum ap = 10,00mm
These cutters machine very efficiently irregular surfaces and rough scale. They can also be            Diameter Range Da* =
used in heavy duty applications up to 10mm depth of cut.                                               116mm to 416mm

This cutter series has an anti-rotation design which ensures a precise number of indexes per           **Denotes non stock items diameter
insert. This gives a maximum possible usage of the available edges for roughing applications.          331mm - 416mm

This unique patented pocket system prevents the inserts from rotating in the pocket, during            8010VR00-_R-20:
heavy feed machining and unstable conditions.                                                          Maximum ap = 10,00mm
                                                                                                       Diameter Range Da* =
Applications:                                                                                          116mm to 216mm
The 80.0VR00-_R-20 cutters are assembled with cartridges for RD..2006.. milling inserts for
face milling applications. Available with medium pitch.                                                **Denotes non stock items diameter
                                                                                                       116mm - 216mm
The cutters series 8000VR00-_R-20 has an unequal medium pitch for reducing vibration and
are for roughing of Steel, Steel Alloys, Stainless Steel and Cast Iron.

The cutter series 8010VR00-_R-20 has an equal medium pitch and is especially
recommended for roughing, of High Temperature Alloys such as Iron Based Alloys, Cobalt
Based Alloys, Nickel Based Alloys and Titanium.

NOTE: The 80.0VR00-_R-20 series when mounted with cartridge 80VR00-_R-20 using
RD..2006.. round button inserts cannot utilise the wiper cartridge for finishing,
when a fine finished surface is required.

www.kennametal.su                                                                                                                          A155

                   для заказа - kennametal@kennametal.su
Заявка