80.0VR00-_R-20 для размещения заказа - kennametal@kennametal.su
Face Milling Cutter Assemblies
Cartridge Face Mills d1 Product Dimensions (mm) Spares
H
D Screw
D Effective ap No. of Tightening
Da* EDP Item Description Cutting Da* H d1 max Teeth EDP EDP
Nm
Cutter Body & Cartridges Diameter 10,50
10,50
8000VR00-_ R-20 Bodies with Unequal Medium Pitch & Cartridges
033139 8000VR00-100R-20 96 116 68 32 10,00 6 T20
033140 8000VR00-125R-20 121 141 63 40 10,00 8 T20
033141 8000VR00-160R-20 156 176 63 40 10,00 10
033142 8000VR00-200R-20 196 216 63 60 10,00 12 029640 D6014T 015241
033143 8000VR00-250R-20 246 266 63 60 10,00 16
033144 8000VR00-315R-20** 311 331 80 60 10,00 20
033145 8000VR00-400R-20** 396 416 80 60 10,00 24
8010VR00-_ R-20 Bodies with Equal Medium Pitch & Cartridges
033146 8010VR00-100R-20** 96 116 68 32 10,00 6
033147 8010VR00-125R-20**
033148 8010VR00-160R-20** 121 141 63 40 10,00 8 029640 D6014T 015241
033149 8010VR00-200R-20** 156 176 63 40 10,00 10
196 216 63 60 10,00 12
** Denotes non stock items.
Da* = Outside Diameter
Product Spares
EDP Item Description EDP Screw Cartridge Adjustment -
EDP Tightening Screw Screw -
EDP
Nm EDP -
Cartridge & Spares
80VRD00R-20 030969 80VRD00R-20 029640 D6014T 015241 T20 10,50 022646 7065
Note: Mounting instructions refer to pages A161 - A164.
Note: RD..2006.. Round button cutter assemblies cannot utilise the finishing wiper cartridges.
80.0VR00-_R-20 Technical Information (mm)
Product Dimensions
EDP Item Description Facing Ramping Helical Hole ap max Max
Pitch Angle ° min. - max. Helical / RPM
033139 8000VR00-100R-20 Linear Ramping Helical
033140 8000VR00-125R-20 96 3.30 194 230 10800 Interpolation
033141 8000VR00-160R-20 121 2.35 244 280 5,00 9200
033142 8000VR00-200R-20 156 1.80 314 350 5,00 7800 Flat
033143 8000VR00-250R-20 196 1.40 396 430 5,00 6800
033144 8000VR00-315R-20** 246 1.10 494 530 5,00 5900 Facing Pitch
033145 8000VR00-400R-20** 311 1.00 624 660 5,00 5200
396 0.75 794 830 5,00 4500
ap 033146 8010VR00-100R-20** 5,00
033147 8010VR00-125R-20** 96 3.30 194 230 10800
D 033148 8010VR00-160R-20** 121 2.35 244 280 5,00 9200
Da* 033149 8010VR00-200R-20** 156 1.80 314 350 5,00 7800
196 1.40 396 430 5,00 6800
Depth of Cut (ap) 5,00
** Denotes non stock items.
A156 www.kennametal.su
для заказа - kennametal@kennametal.su