5210VS для размещения заказа - kennametal@kennametal.su
Shoulder Milling Cutter
d1
L Product Dimensions (mm) Spares
EDP
Shoulder Mills I1 ap EDP Item Description D L/H l1 d1 ap No. of EDP Screw
max Teeth Tightening
max
5210VS09 Weldon Shank Nm
a
D 015235 5210VS09WA032R50 32 119 57 32 50 3 015262 F4010T 015240 T15 3,10
Weldon Shank
5210VS12 Shell Mill Fixation 4 015266 D5013T 015241 T20 6,00
d1 6 015266 D5013T 015241 T20 6,00
021656 5210VS12-080R68 80 82 - 32 68
021657 5210VS12-100R77 100 92 - 40 77
H ap 5210VS Assembly Information
max Product Necessary inserts to assemble the cutter
a EDP Item Description No. of inserts No. of inserts
b Pos. a Pos. b
D 5210VS09 Weldon Shank
Shell Mill Fixation 015235 5210VS09WA032R50 11 x SC 09 only -
5210VS12 Shell Mill Fixation 2 x SO..15M6
2 x SO..15M6
021656 5210VS12-080R68 14 x SO..12M6
021657 5210VS12-100R77 27 x SO..12M6
For the 5210VS12 Both inserts (a) and (b) are required to complete each cutter.
5210VS Technical Information (mm)
Product Dimensions
EDP Item Description Facing Ramping Helical Hole ap max Max Flat
Pitch Angle ° min. - max. Helical / RPM Facing Pitch
015235 5210VS09WA032R50 Linear
021656 5210VS12-080R68 32,00 - -- 35500
021657 5210VS12-100R77 80,00 - -- - 20500
100,00 - -- 18000
-
-
A166 www.kennametal.su
для заказа - kennametal@kennametal.su