5210VS для размещения заказа - kennametal@kennametal.su
Recommended Feeds
5210VS Feeds fz (mm/rev)
Shoulder Mills
Geometry
Grade
Operation
Unalloyed
Steel
Alloyed
Steel
Stainless
Steel
Stainless Steel
Refractory PH
Gray
Iron
Spheroidal-
Ductile Iron
Malleable
Iron
Aluminium &
Alloys
<16% Si 116 HBN
Aluminium &
Silicon
>16% Si 92 HBN
HTA Iron
Based Alloys
HTA Cobalt
Based Alloys
HTA Nickel
Based Alloys
HTA Titanium
Based Alloys
Hard Steel
>1400 N/mm2
>415 HBN
Chilled Cast Iron
>1400 N/mm2
>400 HBN
Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max.
SCMT09
EN-41 X500 Profiling 0,10 - 0,30 0,10 - 0,28 - - - - - - - - - - - - -
EN-41 SP6519 Profiling 0,10 - 0,30 0,10 -0,28 - - - - - - - - - - - - -
EN-41 MP91M Profiling - - - - 0,12 - 0,33 0,12 - 0,33 0,12 - 0,33 - - - - - - 0,08 - 0,13 0,08 - 0,15
T X400 Profiling 0,20 - 0,40 0,20 - 0,35 - - - - - - - - - - - 0,10 - 0,15 -
T SP6519 Profiling 0,20 - 0,38 0,20 - 0,33 - - 0,20 0,40 0,20 - 0,35 0,20 - 0,30 - - - - - - - -
T SP4019 Profiling - - - - 0,20 - 0,40 0,20 - 0,35 0,20 - 0,30 - - - - - - 0,10 - 0,15 0,10 - 0,15
SOMT12
SN-B X500 Profiling 0,50 - 0,90 0,40 - 0,70 - - 0,50 - 0,90 0,50 - 0,90 0,40 - 0,70 - - - - - - - -
SN-B SP6519 Profiling 0,50 - 0,90 0,40 - 0,70 - - 0,50 - 0,90 0,50 - 0,90 0,40 - 0,70 - - - - - - - -
SN-B MP91M Profiling 0,50 - 0,90 0,40 - 0,90 - - 0,50 - 0,90 0,50 - 0,90 0,40 - 0,70 - - - - - - 0,30 - 0,40 0,30 - 0,40
SOMT15
SN-B X500 Profiling 0,50 - 0,90 0,40 - 0,70 - - 0,50 - 0,90 0,50 - 0,90 0,40 - 0,70 - - - - - - - -
SN-B SP6519 Profiling 0,50 - 0,90 0,40 - 0,70 - - 0,50 - 0,90 0,50 - 0,90 0,40 - 0,70 - - - - - - - -
SN-B MP91M Profiling 0,50 - 0,90 0,40 - 0,70 - - 0,50 - 0,90 0,50 - 0,90 0,40 - 0,70 - - - - - - 0,30 - 0,40 0,30 - 0,40
Note: HTA = High Temperature Alloys
Speed recommendations can be found on page A169.
A168 www.kennametal.su
для заказа - kennametal@kennametal.su