Ниже представлена эта же страница в формате, позволяющем производить копирование текста.

KMT STELLRAM - полный каталог инструмента - 2014 год EN

                   для размещения заказа - kennametal@kennametal.su                                      5230VS Series

                                                                                                 Chevron Long Edge Milling Cutter (Porcupine)

                                                                                                         Shoulder /
                                                                                                         Profiling /
                                                                                                          Slotting

HIGH PERFORMANCE LONG EDGE MILLING CUTTERS                                                       5230VS
The Stellram 5230VS09 and VS12 Cutter Series is perfectly qualified for profiling and
full slotting.                                                                                   5230VS09:

Designed for high material removal rates in Titanium and High Temperature Alloys. Several        (ap max is determined by selection of
applications have shown metal removal rates of up to two times greater than the previous         Cutter Diameter)
operating cutting parameters.
                                                                                                 Diameter Range and Maximum ap =
The advanced Chevron design ensures that one cutting point is always in contact with the         50mm Dia. with ap 51mm or 80mm
material during entrance and exit. This provides optimum harmonic stability - resulting in
maximum tool life and a 30% improvement in surface finish. A generous flute capacity             5230VS12:
coupled with each individual cutting edge having its own jet of coolant, provides for excellent
chip evacuation. This works to further enhance surface finish and increases metal removal        (ap max is determined by selection of
rates to a higher level of productivity.                                                         Cutter Diameter)

The advanced 5230VS series is ideal for rough machining of Steel, Alloyed Steel, Stainless       Diameter Range and Maximum ap =
Steel and particular for Titanium and High Temperature Alloys.                                   63mm Dia. with ap 57mm or 94mm
                                                                                                 80mm Dia. with ap 65mm or 110mm
Features and Benefits                                                                            100mm Dia. with ap 76mm or
                                                                                                 133mm
• Insert positioning provides smooth progressive penetration and

   cutting action for extended tool life.

• Individual coolant jets to each insert provides constant chip

   evacuation and temperature stability in the cutting zone.

• The advanced Chevron design improves stability and lowers power

   consumption, increasing tool life up to 2 times greater than comparable
   cutter in today’s market.

• Proven versatility in a wide application area in Titanium and High

   Temperature Alloys increasing productivity.

www.kennametal.su                                                                                        A171

                   для заказа - kennametal@kennametal.su
Заявка