5500V для размещения заказа - kennametal@kennametal.su
Technical Information
5500V Technical Information
Contour Mills Working Diameter:
Dw = 2 x r2 - (r -ap)2
r ap
where: Dw = Working Diameter
r = Cutter radius
ap = Axial Depth of Cut
Dw
5500V Technical Information
Average chip thickness: hm
where: hm = fz x ( )2 ( )2
fz = Feed per tooth ae = Radial Depth of Cut r2 - r - ae r2 - r - ap
ap = Axial Depth of Cut x
r r
hm = Average chip thickness
r = Insert radius To find programmed feedrate: fz
hm
fz =
( )2 ( )2
r2 - r - ae r2 - r - ap
r x
r
Insert Assembly Information
RGInsert Orientation
Countersink
Insert through hole has a countersink on
one side and a counterbore on the other
side. Assemble as shown to create proper
pull back against the cutter pocket.
Insert Bottom
Counterbore
A206 www.kennametal.su
для заказа - kennametal@kennametal.su