для размещения заказа - kennametal@kennametal.su 7700VR Series
Copy Milling Cutter
Facing Copy / 3D Ramping Spiral / Circular Helical Helical Pocketing
Interpolation Interpolation
with Bore Hole
ROUND INSERT MILLING CUTTERS WITHOUT INDEXATION 7700VR
The 7700VR series is mainly for medium roughing and semi-finishing with low axial depth of
cut as well as for finishing of Steel, Tool Steel, Stainless Steel, High Temperature Alloys and 7700VR06:
Aluminium Alloys. Maximum ap = 3mm
Diameter Range = 14mm to 20mm
This series is without an anti-rotation pocket, which allows a maximum number of insert
indexing according to the axial depth of cut requirement. This is an advantage when the 7700VR08:
cutter is being used for semi-finishing and finishing. Maximum ap = 4mm
Diameter Range = 16mm to 32mm
7700VR10:
Maximum ap = 5mm
Diameter Range = 20mm to 32mm
www.kennametal.su A207
для заказа - kennametal@kennametal.su