KMT STELLRAM - полный каталог инструмента - 2014 год EN
Positive Insert Geometries для размещения заказа - kennametal@kennametal.su
-66 Inserts
Introduction -66 Geometry Technical Information VCGT130304E-66 SteSetali:nle4s5s0Ste-e7l:00 450 - 700 N/mm2 HBN 180
Medium to Finishing: VCSGTt2a.51iAn-6l6ess N/mm2 12H0 B- 18N0 120 -
The -66 Geometry has a precision ground periphery and pressed in chip- inch mm VCGT130304E-66
breaker, with a sharp edge condition, ideally suited for fine chip control 0.118 3,00
when machining medical and small precision components.
Available in Grade: GH1 0.100 2,50
Materials Application Cutting Condition 0.080 2,00
0.060 1,50
GH1 0.040 1,00
P M KNSH
448 ap (depth of cut) -66
ap (depth of cut)
Profile
0.020 0,50
mm 0,00 0,05 0,10 0,15 0,20 0,25 0,30
inch 0.000 0.002 0.010 0.015
0.004fn (fe0e.0d0/r6ev) 0.008
fn (feed/rev)
-73 Inserts
-73 Geometry Technical Information 900 - 1200 N/mm22 HBN
Medium to Roughing: 260 - 340
Alloyed Steel: 900 - 1200 N/mm HBN 260 - 340CCMT120408E-73
The -73 Geometry is an as pressed geometry, covering a wide range CCMT432A-73
of applications and materials, making it the ideal first choice for most Alloyed Steel:
medium to roughing, machining applications.
Available in Grades: SP4019, NL300 & NL920 inch mm CCMT120408E-73
0.255 6,50
0.235 6,00
0.216 5,50
Materials Application Cutting Condition 0.180 4,50
SP4019 ap (depth of cut)0.160 4,00
P M KNSH
4 4 4 0.138 3,50
0.118 3,00
NL300 Profile
P M KNSH 0.100 2,50
0.080 2,00
ap (depth of cut) -73
NL920 0.060 1,50
P M KNSH
0.040 1,00
0.020 0,50
mm 0,10 0,20 0,30 0,40 0,50 0,60
0.020 0.023
inch 0.004fn (0f.e00e8d/r0e.0v1)2 0.016
fn (feed/rev)
Material Guide – Key to Recommended Inserts
Material Designation
PP Unalloyed Steels PP Alloyed Steels MM Stainless Steels MM PHStainless KK Cast Irons NN Aluminum & Alloys SS High Temp. Alloys HH Hard Materials
C20 www.kennametal.su
для заказа - kennametal@kennametal.su