KMT STELLRAM - полный каталог инструмента - 2014 год EN

                      80.0VOD45-_R-04 & -06    для размещения заказа - kennametal@kennametal.su
                      Technical Information

Cartridge Face Mills  80_0VOD45 Technical Information

                      Feed rate compensation: For 42° cutting, divide the hm value by the
                      sine of the approach angle (the sine of 42° = 0,669)

                      i.e.: hm         or      0,08
                                0,669          0,669	 = 0,12mm programmed feed rate

                      Calculation of the average chip thickness in relation with the ae (Radial Engagement) if ae is less than 50% of Dia.

                      Formula: Programme Feed Rate (fz)  hm	 =	Average chip thickness      Formula: Average Chip Thickness (hm)
                                                         ae	 =	Radial engagement
                            fz = hm x      d             fz	 =	Feed per tooth                    hm = fz x  ae
                                           ae            d	 = 	Cutter diameter                              d

                      A134                                                                                  www.kennametal.su

                                                         для заказа - kennametal@kennametal.su