KMT STELLRAM - полный каталог инструмента - 2014 год EN

                   для размещения заказа - kennametal@kennametal.su                                8000VS45-_R-12 Series
                                                                                                   Cartridge Face Milling Cutter

                                                                                                                               Facing

45° CARTRIDGE FACE MILLING ASSEMBLIES                                                              8000VS45-_R-12
The robust cutter series 8000VS45-_R-12 is combined with SC..12M5.. square insert.
                                                                                                   8000VS45-_R-12:
8000VS45-_R-12 cutters are assembled with 45° cartridges for face milling applications.            Maximum ap = 7mm
                                                                                                   Effective Cutting Diameter
This type of cutter utilises 5mm thick and 7° degrees clearance inserts. Due to this feature,      Range = 100mm to 400mm
these cutters are capable of running higher feed rates compared to other cutters with 45° lead     ** Denotes non stock items
angle.                                                                                             diameter 315mm - 400mm

8000VS45-_R-12 is ideal for applications when machining surfaces with rough scale or
irregular stock. These cutters feature a negative rake angle which provide excellent chip
evacuation.

The cutter series 8000VS45-_R-12 has an unequal medium pitch for reducing vibration and
are suitable for roughing, semi-finishing and finishing of Steel, Steel Alloys, Cast Iron, and
Stainless Steel.

8000VS45.. series can be assembled with a particular wiper cartridge for finishing when a fine
finished surface is required. The corresponding pocket on the body for the finishing cartridge is
marked with a “F” .
.

www.kennametal.su                                                                                                              A135

                   для заказа - kennametal@kennametal.su