KMT STELLRAM - полный каталог инструмента - 2014 год EN
8000VS45-_R-12 для размещения заказа - kennametal@kennametal.su
Face Milling Cutter Assemblies
Cartridge Face Mills d1 Product Dimensions (mm) Spares
H
D Screw
D Effective ap No. of Tightening
Da EDP Item Description Cutting Da* H d1 max Teeth EDP EDP
Nm
Cutter Body & Cartridges Diameter 6,00
8000VS45-_R-12 Bodies with Unequal Medium Pitch & Cartridge
021851 8000VS45-100R-12 100 115 68 32 7 6 T20
021852 8000VS45-125R-12 125 140 63 40 7 8
021853 8000VS45-160R-12 160 175 63 40 7 10
021854 8000VS45-200R-12 200 215 63 60 7 12 015266 D5013T 015241
021855 8000VS45-250R-12 250 265 63 60 7 16
021856 8000VS45-315R-12** 315 330 80 60 7 20
021857 8000VS45-400R-12** 400 415 80 60 7 24
* Denotes non stock items.
Da* = Outside Diameter
Note: 8000VS45 series are only available in 8000V.
Product Spares
EDP Item Description EDP Screw Cartridge Adjustment
EDP Tightening Screw Screw
Nm EDP EDP
Cartridge & Spares
014946 80VS45R-12 015266 D5013T 015241 T20 6,00 022646 7065 - -
015241 T20
Finishing Cartridge & Spares
80VS45R-12 014953 81FS00R-12 015266 D5013T 6,00 022646 7065 016858 72.602
Note: Mounting instructions refer to pages A161 - A164.
81FS00R-12 8000VS45-_R-12 Technical Information (mm)
45° Product Dimensions
ap
EDP Item Description Facing Ramping Helical Hole ap max Max Flat
D Pitch Angle ° min. - max. Helical / RPM Facing Pitch
Da* 021851 8000VS45-100R-12 Linear
021852 8000VS45-125R-12 100 - -- 10800
Depth of Cut (ap) 021853 8000VS45-160R-12 125 - -- - 9200
021854 8000VS45-200R-12 160 - -- - 7800
A136 021855 8000VS45-250R-12 200 - -- - 6800
021856 8000VS45-315R-12** 250 - -- - 5900
021857 8000VS45-400R-12** 315 - -- - 5200
400 - -- - 4500
-
** Denotes non stock items.
www.kennametal.su
для заказа - kennametal@kennametal.su